Coal handling system supplier for power plant

Coal handling system supplier for power plant, Coal handling is the first step of a thermal power plant that runs on coal. The purpose of the coal handling facility of a thermal power plant is to consistently receive, process, store, and feed coal to the bunkers for the duration of the power plant. In thermal power plants, coal is moved either by railroads, roads, or ropeways.

With the aid of cutting-edge technology and solid industry understanding, we can construct coal handling plants with a maximum production capacity of 60 tonnes. These facilities are equipped with grizzly hoppers, belt conveyors, crushers, vibrating screens, bucket elevators, and other auxiliary machinery to facilitate and speed up work processes.

In Gujarat, Sawhney Industries is a reputable supplier of coal handling plants. With the help of our coal handling system, you will be able to perform and boost your normal production capacity. The best way to move a lot of coal over a long distance is using our methods. They can significantly lower the value of your output due to their low rate of power consumption. Additionally, you'll transport vast amounts of coal that were previously impractical.

Advantages

• You may use this coal handling plant for a very long time, and maintenance and upgrading expenditures are minimal. It can operate in a variety of conditions and is adaptable in its service.
• In power plants, it is also a practical means of moving coal.

Power consumption is kept to a bare minimum, which significantly lowers manufacturing costs. Furthermore, you can move forward at your own pace.

Establishment of a coal handling system:

"Coal Handling" is the first step in the power generation process in a coal-based thermal power plant. So, in this essay, I'll go through the general procedures used in a coal-based thermal power plant's coal handling plant.

The vast majority of the coal is typically supplied by railroads. The coal is delivered to the storage yard of the power plant via a railroad siding line. A wagon tippler is used to unload the coal at the delivery location. It uses a rack and pinion. Belt conveyors transport the coal from the coal unloading site to the dead storage. The belt carries on to transfer point 8 after delivering the coal to the penthouse at 0 meters.

Coal is moved to the subsequent belt using the transfer points. The belt raises the coal to the coal breaker house. It is made up of a rotating machine that rotates the coal while separating the light dust from it using gravity. The dust is then transferred to the reject bin house via a belt.

The belt raises the coal further higher to transfer point 7 before transferring it to the crusher. To make the coal acceptable for milling systems, the coal is crushed in the crusher using a high-speed 3-phase induction motor. Through transfer point 8, coal rises from the crusher house and travels to the dead storage.

A coal handling plant's equipment:

• Pulling a chord switch.
  On the side of the conveyor belt, a number of these switches are set in a series and spaced 1m apart. Only when all switches are connected in series does the conveyor belt's rotor get electricity.
• dynamic feeder
  Vibrations from the vibrating feeder cause the coal kept in a large hub to be collected on the belt.
• flutter doors
  If the first belt is damaged or unhealthy, these are utilized to redirect the flow of coal through a different belt. The flap gates open to allow coal to pass and close to stop it from moving.
• A magnet separator
  They are employed in the process of separating the coal's iron impurities.
• Metal detecting
  The transmitter is made up of a high-frequency oscillator that generates oscillations at a frequency of 15 Hz and 15 V. This frequency signal reaches the receiver. Whether there is any metal in the coal. The conveyor belt is then stopped when this frequency is interrupted and a tripping signal is sent to the relay.
• belt heavier
  It is used to maintain track of the tension on the coal-carrying belt and moves under that tension.
   
• Reclaim bucket
  Reclamation is the process of removing coal from the dead storage and preparing it or feeding it further into the reclaim hoppers. Conveyor belts are used to do this.

Our goal is to help different businesses with material management. Because of our dependable and time-saving solutions, we are one of the most reputable suppliers of coal handling plants in India and overseas. Contacting us will allow you to discuss your needs with us.